K224B Precision Adapter, DC to 40 GHz, 50 Ohm, K(m)-K(f)

Home
About Us
Resources

CMP-70
Custom Channel
Modeling Platform

For development of high-speed systems based on your stack-up. Includes full HFSS and Simbeor model library to 70 GHz. Deliverables include pristine connector launches and stellar via designs, cross section analysis, and unimpeachable material / loss models.

12 weeks typical completion
Launch design 3X better than IEEE PG370 compliance
Via and HDI interconnect optimization
Material extraction including surface roughness modeling provided
Allegro layout (.brd or OBD++)

CMP-28/CMP-32
32 Gbpsec and 50 GHz
Standard Channel Modeling

Our standard channel modeling platforms are built for enhancing signal integrity workflow confidence to 50 GHz and 32 Gbpsec, so you can benchmark and prove out your solution.

EDA Starter Kits (Agilent ADS / Simbeor / Ansys HFSS)
Signal integrity training, benchmarking EDA tools
Passive/Causal-tested S-parameters provided
Allegro layout (.brd or OBD++)

XTALK-32
6-56 Gbpsec
Crosstalk Aggression

The industry’s first tool for Crosstalk generation in 6-32 Gbpsec NRZ and PAM-4 56 Gbpsec systems. Provides crosstalk for low, medium, and high return loss conditions in seconds.

IEEE 802.3bj, OIF-CEI 25G LR, COM
Mimics backplanes
10µV to 200mV of RX noise
Can be used with ISI-28/32 for combining loss and crosstalk
Includes Keysight ADS EDA Serial Link kit supporting IBIS-AMI and Single Bit Response optimization
Includes S-parameter library for direct EDA serial-link simulations

ISI-28/ISI-32
Ultra-low Return Loss ISI
(Intersymbol Interference)

For open to closed eye from 6-56 Gbpsec. using stellar signal integrity Microstrip and Stripline topologies. Pre-silicon EDA capable using supplied S-parameter models.

Signal integrity 3X better than IEEE PG370 compliance
Very easy to use with complete user’s manual
Includes Keysight ADS EDA Serial-Link kit supporting IBIS-AMI and Single Bit Response optimization
Includes S-parameter library for direct EDA serial link simulations
Pristine launch designs for low return loss
Low weave and high signal integrity material for low phase and group delay noise

Components
Contact
Search ...

SKU: 504-K224-02

Features

K Connector® DC to 40 GHz frequency range
Low SWR and insertion loss

The K224B precision adapter enables accurate measurements with K Connectors. Fully specified and 100% tested to ensure low reflections and optimum performance.

33KFKF50B Calibration Grade Adapter, DC to 40 GHz, K(f )-K(f), 50 Ohm

33kfkf50b-calibration-grade-adapter-dc-to-40-ghz-k-f-k-f-50-ohm

SKU: 505-33KFKF50-02 The Anritsu 33 Series of precision adapters enable accurate measurements with K Connector® interfaces. Every adapter is fully specified and 100% tested to ensure low reflections and optimum phase...

33KK50B Calibration Grade Adapter, K(m)-K(m), DC to 40 GHz, 50 ohm

33kk50b-calibration-grade-adapter-k-m-k-m-dc-to-40-ghz-50-ohm

SKU: 505-33KK50-02 Features Low SWR and insertion loss DC to 40 GHz with 2.92mm (K Connector®) interface 50 ohms impedance The Anritsu 33 Series of precision adapters enable accurate measurements with K Connector...

33KKF50B Calibration Grade Adapter, DC to 40 GHz, K(m) – K(f), 50 Ohm

33kkf50b-calibration-grade-adapter-dc-to-40-ghz-k-m-k-f-50-ohm

SKU: 505-33KKF50-02 The Anritsu 33 Series of precision adapters enable accurate measurements with 2.92mm (K) Connector interfaces. Every adapter is fully specified and 100% tested to ensure low reflections and optimum phase...

33VFVF50C Coaxial Adapter, V(f) to V(f), DC – 70 GHz

33vfvf50c-coaxial-adapter-v-f-to-v-f-dc-70-ghz

SKU: 505-33KKF50-02 The Anritsu 33 Series precision adapters enable accurate measurements with V Connectors. Every adapter is fully specified and 100% tested to ensure low reflections and optimum performance over the DC to 70 GHz...

33VV50C Calibration Grade Adapter, DC to 70 GHz, V(m)-V(m), 50 ohm

33vv50c-calibration-grade-adapter-dc-to-70-ghz-v-m-v-m-50-ohm

SKU: 505-33VV50-03 Features Low SWR and insertion loss DC to 70 GHz with V Connector® interface 50 ohms impedance The Anritsu 33 Series of precision adapters enable accurate measurements with V Connector interfaces....

33VVF50C Coaxial Adapter, V(m) to V(f), DC – 70 GHz

33vvf50c-coaxial-adapter-v-m-to-v-f-dc-70-ghz

SKU: 505-33VVF50-03 The Anritsu 33 Series precision adapters enable accurate measurements with V Connectors. Every adapter is fully specified and 100% tested to ensure low reflections and optimum performance over the DC to 70...

33WFWF50 W1 Female to Female Coaxial Adapter (1 mm to 1 mm)

33wfwf50-w1-female-to-female-coaxial-adapter-1-mm-to-1-mm

SKU: 505-33WFWF50-00 The 33 series of precision W1 Adapters enable accurate measurements with Anritsu W1 Connector (1.0 mm Connector) at broad frequency range of up to 110 GHz. The 33 series W1-W1 Adapters are available in...

33WW50 W1 Male to Male Coaxial Adapter (1 mm to 1 mm)

33ww50-w1-male-to-male-coaxial-adapter-1-mm-to-1-mm

SKU: 505-33WW50-00 The 33 series of precision W1 Adapters enable accurate measurements with Anritsu W1 Connector(1.0 mm Connector) at broad frequency range of up to 110 GHz. The 33 series W1-W1 Adapters are available in two...

33WWF50 W1 Male to Female Coaxial Adapter (1 mm to 1 mm)

33wwf50-w1-male-to-female-coaxial-adapter-1-mm-to-1-mm

SKU: 505-33WWF50-00 The 33 series of precision W1 Adapters enable accurate measurements with Anritsu W1 Connector (1.0 mm Connector) at broad frequency range of up to 110 GHz. The 33 series W1-W1 Adapters are also available...

34RKRK50 – Precision Adapter, Ruggedized, K(m) – K(m), DC to 40 GHz

34rkrk50-precision-adapter-ruggedized-k-m-k-m-dc-to-40-ghz

SKU: 505-34RKRK50-00 This 34R Series precision adapter provides a rugged, rigid connection between instruments with K Connector®, or V Connector® outputs and other instruments, which enhances reliability of test setups....

34RVRK50 – Precision Adapter, Ruggedized, V(m) – K(m), DC to 40 GHz

34rvrk50-precision-adapter-ruggedized-v-m-k-m-dc-to-40-ghz

SKU: 505-34RVRK50-00 This 34R Series precision adapter provides a rugged, rigid connection between instruments with K Connector®, or V Connector® outputs and other instruments. Enhances reliability of test...

34RVRK50 – Precision Adapter, Ruggedized, V(m) – K(m), DC to 40 GHz (2)

34rvrk50-precision-adapter-ruggedized-v-m-k-m-dc-to-40-ghz-2

SKU: 505-34RVRK50-00 This 34R Series precision adapter provides a rugged, rigid connection between instruments with K Connector®, or V Connector® outputs and other instruments. Enhances reliability of test...

34RVRV50 – Precision Adapter, Ruggedized, V(m) – V(m), DC to 60 GHz

34rvrv50-precision-adapter-ruggedized-v-m-v-m-dc-to-60-ghz

SKU: 505-34RVRV50-00 This 34R Series precision adapter provides a rugged, rigid connection between instruments with K Connector®, or V Connector® outputs and other instruments, which enhances reliability of test...

34VFK50 Coaxial Adapter, V(f) to K(m), DC – 40 GHz

34vfk50-coaxial-adapter-v-f-to-k-m-dc-40-ghz

SKU: 505-34VFK50-00 The Anritsu 34V Series precision adapters enable accurate measurements with K or V Connectors. Every adapter is fully specified and 100% tested to ensure low reflections and optimum performance over the DC...

34VFKF50 Coaxial Adapter, V(f) to K(f), DC – 40 GHz

34vfkf50-coaxial-adapter-v-f-to-k-f-dc-40-ghz

SKU: 505-34VFKF50-00 The Anritsu 34V Series precision adapters enable accurate measurements with K or V Connectors. Every adapter is fully specified and 100% tested to ensure low reflections and optimum performance over the...

34VFVF50C Coaxial Adapter, V(f) to V(f), DC – 65 GHz

34vfvf50c-coaxial-adapter-v-f-to-v-f-dc-65-ghz

SKU: 505-34VFVF50-03 The Anritsu 34V Series precision adapters enable accurate measurements with K or V Connectors. Every adapter is fully specified and 100% tested to ensure low reflections and optimum performance over the...

34VK50 Coaxial Adapter, V(m) to K(m), DC – 40 GHz

34vk50-coaxial-adapter-v-m-to-k-m-dc-40-ghz

SKU: 505-34VK50-00 The Anritsu 34V Series precision adapters enable accurate measurements with K or V Connectors. Every adapter is fully specified and 100% tested to ensure low reflections and optimum performance over the DC...

34VKF50 Coaxial Adapter, V(m) to K(f), DC – 40 GHz

34vkf50-coaxial-adapter-v-m-to-k-f-dc-40-ghz

SKU: 505-34VK50-00 The Anritsu 34V Series precision adapters enable accurate measurements with K or V Connectors. Every adapter is fully specified and 100% tested to ensure low reflections and optimum performance over the DC...

34VV50 Coaxial Adapter, V(m) to V(m), DC – 65 GHz

34vv50-coaxial-adapter-v-m-to-v-m-dc-65-ghz

SKU: 505-34VV50-00 The Anritsu 34V Series precision adapters enable accurate measurements with K or V Connectors. Every adapter is fully specified and 100% tested to ensure low reflections and optimum performance over the DC...

34VVF50 Coaxial Adapter, V(m) to V(f), DC – 65 GHz

34vvf50-coaxial-adapter-v-m-to-v-f-dc-65-ghz

SKU: 505-34VVF50-00 The Anritsu 34V Series precision adapters enable accurate measurements with K or V Connectors. Every adapter is fully specified and 100% tested to ensure low reflections and optimum performance over the DC...

Anritsu K220B Precision Adapter, DC to 40 GHz, 50 Ohm, K(m)-K(m)

anritsu-k220b-precision-adapter-dc-to-40-ghz-50-ohm-k-m-k-m

SKU: 504-K220-02 The K220 precision adapter enables accurate measurements with K connectors. It’s full specified and 100% tested to ensure low reflections and optimum performance. Features 2.92mm male (Km)...

K222B Precision Adapter, DC to 40 GHz, 50 Ohm, K(f)-K(f)

k222b-precision-adapter-dc-to-40-ghz-50-ohm-k-f-k-f

SKU: 504-K222-02 The K222B precision adapter enables accurate measurements with K connectors. Each one is fully specified and 100% tested to ensure low reflections and optimum performance. Features 2.92mm (K) Connector DC to 40 GHz...

K224B Precision Adapter, DC to 40 GHz, 50 Ohm, K(m)-K(f)

k224b-precision-adapter-dc-to-40-ghz-50-ohm-k-m-k-f

SKU: 504-K224-02 Features K Connector® DC to 40 GHz frequency range Low SWR and insertion loss The K224B precision adapter enables accurate measurements with K Connectors. Fully specified and 100% tested to ensure low reflections and...

Wild River Technology (Americas)
8311 SW Charlotte Drive
Beaverton, OR 97007 USA
Phone: +1 (800) 604-0858

ATE Service Corporation (japan)
5-6-23 Minamimachida, Machida-shi
Yokyo, Japan 194-0005
Phone: 042-795-8600

Zetta One Technologies (India)
No.2/1, 9th Cross
Wilson garden, Bangalore – 560027
Karnataka. India
Phone: +91 80 4155 0111

sales@wildrivertech.com
Copyright © 2018 Wild River Technology. All Rights Reserved.

web design by info-mgt.net