41V-6 Precision Fixed Attenuator, 6 dB, DC to 65 GHz, V(m) – V(f), 50 Ohm

Home
About Us
Resources

CMP-70
Custom Channel
Modeling Platform

For development of high-speed systems based on your stack-up. Includes full HFSS and Simbeor model library to 70 GHz. Deliverables include pristine connector launches and stellar via designs, cross section analysis, and unimpeachable material / loss models.

12 weeks typical completion
Launch design 3X better than IEEE PG370 compliance
Via and HDI interconnect optimization
Material extraction including surface roughness modeling provided
Allegro layout (.brd or OBD++)

CMP-28/CMP-32
32 Gbpsec and 50 GHz
Standard Channel Modeling

Our standard channel modeling platforms are built for enhancing signal integrity workflow confidence to 50 GHz and 32 Gbpsec, so you can benchmark and prove out your solution.

EDA Starter Kits (Agilent ADS / Simbeor / Ansys HFSS)
Signal integrity training, benchmarking EDA tools
Passive/Causal-tested S-parameters provided
Allegro layout (.brd or OBD++)

XTALK-32
6-56 Gbpsec
Crosstalk Aggression

The industry’s first tool for Crosstalk generation in 6-32 Gbpsec NRZ and PAM-4 56 Gbpsec systems. Provides crosstalk for low, medium, and high return loss conditions in seconds.

IEEE 802.3bj, OIF-CEI 25G LR, COM
Mimics backplanes
10µV to 200mV of RX noise
Can be used with ISI-28/32 for combining loss and crosstalk
Includes Keysight ADS EDA Serial Link kit supporting IBIS-AMI and Single Bit Response optimization
Includes S-parameter library for direct EDA serial-link simulations

ISI-28/ISI-32
Ultra-low Return Loss ISI
(Intersymbol Interference)

For open to closed eye from 6-56 Gbpsec. using stellar signal integrity Microstrip and Stripline topologies. Pre-silicon EDA capable using supplied S-parameter models.

Signal integrity 3X better than IEEE PG370 compliance
Very easy to use with complete user’s manual
Includes Keysight ADS EDA Serial-Link kit supporting IBIS-AMI and Single Bit Response optimization
Includes S-parameter library for direct EDA serial link simulations
Pristine launch designs for low return loss
Low weave and high signal integrity material for low phase and group delay noise

Components
Contact
Search ...

SKU: 503-41V-06

Use Gold Line Series fixed attenuators for precision measurement applications covering DC to 65 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.

41KB-10 Precision Fixed Attenuator, 10 dB, DC to 26.5 GHz, K(m) – K(f), 50 Ohms

41kb-10-precision-fixed-attenuator-10-db-dc-to-26-5-ghz-k-m-k-f-50-ohms

SKU: 503-41KB-10 Gold Line Series fixed Attenuators for precision measurement applications covering DC to 26.5 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.

41KB-20 Precision Fixed Attenuator, 20 dB, DC to 26.5 GHz, K(m) – K(f), 50 Ohms

41kb-20-precision-fixed-attenuator-20-db-dc-to-26-5-ghz-k-m-k-f-50-ohms

SKU: 503-41KB-20 Gold Line Series fixed Attenuators for precision measurement applications covering DC to 26.5 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.e.

41KB-3 Precision Fixed Attenuator, 3 dB, DC to 26.5 GHz, K(m) – K(f), 50 Ohms

41kb-3-precision-fixed-attenuator-3-db-dc-to-26-5-ghz-k-m-k-f-50-ohms

SKU: 503-41KB-03 Gold Line Series fixed Attenuators for precision measurement applications covering DC to 26.5 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.e.

41KB-6 Precision Fixed Attenuator, 6 dB, DC to 26.5 GHz, K(m) – K(f), 50 Ohms

41kb-6-precision-fixed-attenuator-6-db-dc-to-26-5-ghz-k-m-k-f-50-ohms

SKU: 503-41KB-06 Gold Line Series fixed Attenuators for precision measurement applications covering DC to 26.5 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.e.

41KC-10 Fixed Attenuator, 10 dB, DC to 40 GHz, K(m) to K(f), 50 Ohm

41kc-10-fixed-attenuator-10-db-dc-to-40-ghz-k-m-to-k-f-50-ohm

SKU: 503-41KC-10 Gold Line Series fixed Attenuators for precision measurement applications covering DC to 26.5 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.e.

41KC-20 Fixed Attenuator, 20 dB, DC to 40 GHz, K(m) to K(f), 50 Ohm

41kc-20-fixed-attenuator-20-db-dc-to-40-ghz-k-m-to-k-f-50-ohm

SKU: 503-41KC-20 Gold Line Series fixed Attenuators for precision measurement applications covering DC to 26.5 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.e.

41KC-3 Fixed Attenuator, 3 dB, DC to 40 GHz, K(m) to K(f), 50 Ohm

41kc-3-fixed-attenuator-3-db-dc-to-40-ghz-k-m-to-k-f-50-ohm

SKU: 503-41KC-03 Gold Line Series fixed Attenuators for precision measurement applications covering DC to 26.5 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.e.

41KC-6 Fixed Attenuator, 6 dB, DC to 40 GHz, K(m) to K(f), 50 Ohm

41kc-6-fixed-attenuator-6-db-dc-to-40-ghz-k-m-to-k-f-50-ohm

SKU: 503-41KC-06 Gold Line Series fixed Attenuators for precision measurement applications covering DC to 26.5 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.e.

41V-10 Precision Fixed Attenuator, 10 dB, DC to 65 GHz, V(m) – V(f), 50 Ohm

41v-10-precision-fixed-attenuator-10-db-dc-to-65-ghz-v-m-v-f-50-ohm

SKU: 503-41V-10 Use Gold Line Series fixed attenuators for precision measurement applications covering DC to 65 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.

41V-20 Precision Fixed Attenuator, 20 dB, V(m) – V(f), 50 Ohm

41v-20-precision-fixed-attenuator-20-db-v-m-v-f-50-ohm

SKU: 503-41V-20 Use Gold Line Series fixed attenuators for precision measurement applications covering DC to 65 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.

41V-3 Precision Fixed Attenuator, 3 dB, DC to 65 GHz, V(m) – V(f), 50 Ohm

41v-3-precision-fixed-attenuator-3-db-dc-to-65-ghz-v-m-v-f-50-ohm

SKU: 503-41V-03 Use Gold Line Series fixed attenuators for precision measurement applications covering DC to 65 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.

41V-6 Precision Fixed Attenuator, 6 dB, DC to 65 GHz, V(m) – V(f), 50 Ohm

41v-6-precision-fixed-attenuator-6-db-dc-to-65-ghz-v-m-v-f-50-ohm

SKU: 503-41V-06 Use Gold Line Series fixed attenuators for precision measurement applications covering DC to 65 GHz. Features: Low SWR; SMA and 3.5 mm Compatibility ; Rugged and Reliable.

43KB-10 Fixed Attenuator, 10 dB, DC to 26.5 GHz, K(m) to K(f), 50 Ohm

43kb-10-fixed-attenuator-10-db-dc-to-26-5-ghz-k-m-to-k-f-50-ohm

SKU: 503-43KB-10 Silver Line Series fixed Attenuators for use in systems and OEM equipment covering DC to 26.5 GHz. Features — Low SWR. SMA and 3.5 mm Compatibility. Rugged and reliable.

43KB-20 Fixed Attenuator, 20 dB, DC to 26.5 GHz, K(m) to K(f), 50 Ohm

43kb-20-fixed-attenuator-20-db-dc-to-26-5-ghz-k-m-to-k-f-50-ohm

SKU: 503-43KB-20 Silver Line Series fixed Attenuators for use in systems and OEM equipment covering DC to 26.5 GHz. Features — Low SWR. SMA and 3.5 mm Compatibility. Rugged and reliable.

43KB-3 Fixed Attenuator, 3 dB, DC to 26.5 GHz, K(m) to K(f), 50 Ohm

43kb-3-fixed-attenuator-3-db-dc-to-26-5-ghz-k-m-to-k-f-50-ohm

SKU: 503-43KB-3 Silver Line Series fixed Attenuators for use in systems and OEM equipment covering DC to 26.5 GHz. Features — Low SWR. SMA and 3.5 mm Compatibility. Rugged and reliable.

43KB-6 Fixed Attenuator, 6 dB, DC to 26.5 GHz, K(m) to K(f), 50 Ohm

43kb-6-fixed-attenuator-6-db-dc-to-26-5-ghz-k-m-to-k-f-50-ohm

SKU: 503-43KB-6 Silver Line Series fixed Attenuators for use in systems and OEM equipment covering DC to 26.5 GHz. Features — Low SWR. SMA and 3.5 mm Compatibility. Rugged and reliable.

43KC-10 Fixed Attenuator, 10 dB, DC to 40 GHz, K(m) to K(f), 50 Ohm

43kc-10-fixed-attenuator-10-db-dc-to-40-ghz-k-m-to-k-f-50-ohm

SKU: 503-43KC-10 Silver Line Series fixed Attenuators for use in systems and OEM equipment covering DC to 40 GHz. Features – Low SWR, SMA and 3.5 mm Compatibility, Rugged and reliable

43KC-20 Fixed Attenuator, 20 dB, DC to 40 GHz, K(m) to K(f), 50 Ohm

43kc-20-fixed-attenuator-20-db-dc-to-40-ghz-k-m-to-k-f-50-ohm

SKU: 503-43KC-20 Silver Line Series fixed Attenuators for use in systems and OEM equipment covering DC to 40 GHz. Features – Low SWR, SMA and 3.5 mm Compatibility, Rugged and reliable

43KC-3 Fixed Attenuator, 3 dB, DC to 40 GHz, K(m) to K(f), 50 Ohm

43kc-3-fixed-attenuator-3-db-dc-to-40-ghz-k-m-to-k-f-50-ohm

SKU: 503-43KC-3 Silver Line Series fixed Attenuators for use in systems and OEM equipment covering DC to 40 GHz. Features – Low SWR, SMA and 3.5 mm Compatibility, Rugged and reliable

43KC-6 Fixed Attenuator, 6 dB, DC to 40 GHz, K(m) to K(f), 50 Ohm

43kc-6-fixed-attenuator-6-db-dc-to-40-ghz-k-m-to-k-f-50-ohm

SKU: 503-43KC-06 Silver Line Series fixed Attenuators for use in systems and OEM equipment covering DC to 40 GHz. Features – Low SWR, SMA and 3.5 mm Compatibility, Rugged and reliable

Wild River Technology (Americas)
8311 SW Charlotte Drive
Beaverton, OR 97007 USA
Phone: +1 (800) 604-0858

ATE Service Corporation (japan)
5-6-23 Minamimachida, Machida-shi
Yokyo, Japan 194-0005
Phone: 042-795-8600

Zetta One Technologies (India)
No.2/1, 9th Cross
Wilson garden, Bangalore – 560027
Karnataka. India
Phone: +91 80 4155 0111

sales@wildrivertech.com
Copyright © 2018 Wild River Technology. All Rights Reserved.

web design by info-mgt.net