SKU: 503-0048-03

Wild River Technology matched cables are the first cables specifically designed for 10-32 Gbpsec jitter analysis. Skew matched to 1ps, these flexible cable assemblies have 2.92 mm male connectors (custom configurations available, contact WRT) and unmatched phase stability which result in repeatable measurements of jitter. These U.S. manufactured cables accomplish low return loss up to 40 GHz.

This cable utilizes a silver plated copper conductor, with a very low loss expanded PTFE dielectric. The shield consists of two conductive layers. The first layer is a silver plated copper flat wire, applied in such manner that it yields low contact resistance and results in low insertion loss. The second layer is a silver plated copper braided shield that contributes to excellent RF leakage characteristics, specified at > -100 dB to 18 GHz. The standard outside jacket is a tough, resin melt, extruded FEP.

Each cable is individually hand tested and comes with the measured s2p Touchstone file.

What You Get with Your Order

  • Cables
  • UV Curing Lamp
  • Loctite SI 5056 Light Cure Adhesive
  • Spudger tool (Used for removing sealant)
  • Thumb drive. Contents:
    - Video on how to seal the cable connectors
    - Full VNA measurement results)
    - Usage procedure for sealing the cable connectors
  • Printed Documents
    - Certificate of compliance
    - Graphs of VNA results
    - Usage procedure for sealing the cable connectors


 

STANDARD PLATFORMS

Ask us about our custom test fixtures and signal integrity layout services


CMP-70

Custom Channel
Modeling Platform



For development of high-speed systems based on your stack-up.  Includes full HFSS and Simbeor model library to 70 GHz. Deliverables include pristine connector launches and stellar via designs, cross section analysis, and unimpeachable material / loss models.

  • 12 weeks typical completion
  • Launch design 3X better than IEEE PG370 compliance
  • Via and HDI interconnect optimization
  • Material extraction including surface roughness modeling provided
  • Allegro layout (.brd or OBD++)

> Read More

CMP-28/CMP-32

32 Gbpsec and 50 GHz
Standard Channel Modeling



Our standard channel modeling platforms are built for enhancing signal integrity workflow confidence to 50 GHz and 32 Gbpsec, so you can benchmark and prove out your solution.

  • EDA Starter Kits (Agilent ADS / Simbeor / Ansys HFSS)
  • Signal integrity training, benchmarking EDA tools
  • Passive/Causal-tested S-parameters provided
  • Allegro layout (.brd or OBD++)

> Read More

XTALK-32

6-56 Gbpsec
Crosstalk Aggression



The industry’s first tool for Crosstalk generation in 6-32 Gbpsec NRZ and PAM-4 56 Gbpsec systems. Provides crosstalk for low, medium, and high return loss conditions in seconds.

  • IEEE 802.3bj, OIF-CEI 25G LR, COM
  • Mimics backplanes
  • 10µV to 200mV of RX noise
  • Can be used with ISI-28/32 for combining loss and crosstalk
  • Includes Keysight ADS EDA Serial Link kit supporting IBIS-AMI and Single Bit Response optimization
  • Includes S-parameter library for direct EDA serial-link simulations

> Read More

ISI-28/ISI-32

Ultra-low Return Loss ISI
(Intersymbol Interference)



For open to closed eye from 6-56 Gbpsec.  using stellar signal integrity Microstrip and Stripline topologies. Pre-silicon EDA capable using supplied S-parameter models.

  • Signal integrity 3X better than IEEE PG370 compliance
  • Very easy to use with complete user’s manual
  • Includes Keysight ADS EDA Serial-Link kit supporting IBIS-AMI and Single Bit Response optimization
  • Includes S-parameter library for direct EDA serial link simulations
  • Pristine launch designs for low return loss
  • Low weave and high signal integrity material for low phase and group delay noise

> Read More

 

­