Wild River Technology offers one hour technical webinars on subjects of advanced modeling of interconnects. These webinars are FREE and open to everyone (registration required at our site). To schedule a webinar or class and to receive the classes outline, please contact to Alfred Neves, tel. +1-503-718-7172.

All scheduled events are in Pacific Time.

You can either call into the webinar via telephone or listen through your computer speakers.
Webinars are limited to the first 100 people who sign in.
All recorded webinars will be available here within 2 days after the recording.

Future Webinars

No webinars scheduled.

Past Webinars

Login required to download and view files.

4 Essential Steps for EDA Simulation-Measurement Mastery

This Seminar will help you achieve this level of modeling-measurement using Simbeor as demonstrated using Wild River Technology’s CMP-28 Advanced Channel Modeling Platform in a systematized and high confidence approach

Step 1: Measure S-parameters and validate quality
Step 2: Import and adjust stack-up and board geometry into EDA tool
Step 3: Identify broadband dielectric and conductor roughness models
Step 4: Simulate all structures on the validation board without further adjustments and compare magnitude and phase of S-parameters, TDR/TDT and eye diagrams


Analysis to measurement validation with CMP-28/32 platform
How to Use Fixture De-embedding to Match Signal Integrity Simulations to Measurements

This video provides a quick overview of how fixture de-embedding from measurements, or embedding into simulations is a critical step for matching simulations to measurements for physical layer Tx to Rx channels. Multigigabit channels that include multi-layer laminate or printed circuit board structures require a fixture to go from the coaxial connections of the measuring instrument to the planar transmission line structures on a PCB. This fixture is not calibrated out by the coaxial calibration of the instrument, and is often neglected in the simulation. This video will go through a 4-step process to show how to de-embed the fixture from the measurement to validate the PCB channel model, and then how to embed the fixture with the model to do a direct compare of simulation to full-path measurement both in the frequency domain and time domain. The end result is demonstrated using a 32Gb/s example of simulation to measurement correlation.

To download the project files referred to in this video visit http://srchedadocs.software.keysight.com/cgi-bin/workspace_request/wsr_form.cgi?id=201411013&l=en